Tuesday, September 30, 2008

Posting # 1 Decisions ….

I am not qualified to build a boat. I don't think any of my previous woodworking projects and experiences prepares me for the complexity of boat building. When it comes to building I tend to be impulsive and any projects taking more than two days are usually left undone. Obviously if this boat is going to be built I need to do things differently.

My wish list:
1. Car top transporting
2. Hold a crew of two or less (Max load weight = 500 pounds)
3. Converts to a rowboat when the wind is not cooperating
4. Made of stock material I can get from my local Home Depot
5. Easy to build
6. Looks beautiful
7. Have a “retractable or removal keel”


First I have to decide the options for a “retractable or removal keel”.
The keel converts the forward motion into a windward lift, countering the leeward push of the sail this causes the boat to go forward instead of moving side ways or tipping over. The keel is retracted or removed when beaching, going downwind or when rowing. A small sailboat that converts to a rowboat needs to have “a retractable or removal keel”. There are three options for this type of keel.


1. Leeboards are entirely outside the boat with all the mechanism readily accessible, which is good. BUT they are generally ugly.
2. Centerboards can easily be raised partially, either in shallow water or to change the helm balance. They are more trouble to build, the trunk is a lot larger and occupies a very useful part of the boat, the pivot requires careful planning or it can leak.
3. Daggerboards take up a lot less space in the boat when they’re down. They are a problem in shallow water because they’re hard to raise. Sailing right up on the beach requires good timing and coordination. They can be damaged by running into something hard at speed.

Decision Made:
After doing hours of online research online I have decided on using parts of two plans – risky?
1. The Summer Breeze

is a fairly simple boat to build but looks more like a plain Jane rowboat and the Lee board is unsightly




2. The Mini Cup


is harder to build, smaller looks great but designed for warmer waters (expect to get wet in this boat).




My Plan
I will build the Summer Breeze’s hull with out the Leeboard and will use the plans for the Mini Cup’s Daggerboard instead. I will add a deck top similar to the Mini Cup’s. I also like the design for the sail and rigging for the Mini Cup and will use that design for my boat.

No comments: