Tuesday, October 28, 2008

Posting # 6 The Belly of the Beast


As you may have concluded I have decided on “Le Bete de la Mer” French for “The Beast of the Sea” as the name for my boat. I usually call it “The Beast”. I am working on the interior hull (the belly of the beast).


In the picture you can see Carmel, our dog, is sitting in the The Beast. I am using Styrofoam board between the exterior and interior hull. The Styrofoam will give it more floatation in case a tsaumi swamps The Beast. Behind Carmel is what is referred to as the “trunk” for the dagger board and mast.

Friday, October 17, 2008

Posting # 5 Stitch-and-Glue



Stitch-and-glue construction is a technique using plywood, wire, glue, fiberglass cloth, epoxy fillers, and epoxy resin.

I stitched the bottom to the sides with wire along the seams. The wire holds the panels together until the glue is cured (I am using PL premium construction adhesive). I will remove the wires in a few days.

One nice thing about stitch-and-glue construction is that fewer tools are required compared to other methods of construction

Sunday, October 12, 2008

Posting # 4 “Le Bete Del La Mer” is beginning to look like a Boat


After working 10 hours over two days I have managed to take a pile of flat, two-dimensional lumber and bend into a gracefully curve shape that resembles a boat.

Thursday, October 9, 2008

Posting # 3 – Feedback

Thanks to all that have given me feedback on my boat-building project. Comments range from support to concern interspersed with skepticism. Mom and Dad are happy that I know how to swim and but have advised me to purchase life preservers. Gregory has advised me to be patient and to use a lot of clamps. Tim has suggested that I name my boat “In Denial”.

About the name, some are thinking I already named my boat “Summer Breeze”, not true. I am using plans for a boat called “Summer Breeze”. Full plans are available on the Internet. The plans for this boat won a challenge sponsored by the website Ducksworks http://www.duckworksmagazine.com. I will be making changes to the plans as I go. Hopefully these changes will be improvements. I have not pick a name for the boat and welcome any suggestions. I am considering Tim’s suggestion “In Denial”. I might name it after a work of art by Matisse “Les Betes De La Mer ”The Beast of the Sea”.

Monday, October 6, 2008

Posting # 2 Creating a Workspace, Tools and Materials - click on images to enlarge


I have spent the last two weeks reading and rereading the two sets of plans I am using to build my boat (the Summer Breeze and the Mini Cup). Now I have a good idea of what I need and how it’s all going to fit together.


Workspace
Boat building needs to be done in an area protected from the weather. The only clear choice for me was our garage. Our Garage was built in 1929 probably for a Model T Ford. Good thing my boat is only 12 feet in length or it would be a tight fit. A workbench was built at the far end and a garage door added (I don’t want anybody stealing my boat). I had a little trouble building a pair of simple sawhorses. I can’t imagine the trouble I will have building a boat.


Tools
Various sanders
Saws (table, hand and jig)
Measuring tape, carpenter and bevel square
Drill and screwdrivers





Materials
1. Three 4X8 sheets of ¼ inch ply wood (plans for marine grade BUT some have suggested shop grade is as good and perhaps better than exterior grade).
2. ¾ in stock hemlock or straight grain fir for gunwales, chines, transom and seats.
3. Two 2x4s in 15 foot lengths for the mask and boom
4. Glues (epoxy for below water line, premium grade adhesive and water resistant carpenters glue for other areas)
5. About 1000 screws (stainless steel or brass) in various lengths
6. Polytarp and duct tape for the sail
7. Close line type rope for the rigging
8. About 12 eye bolts
9. Auto body filler putty. fiberglass and high gloss latex or oil enamel paint